Toys & Models Henry Room

Exhibition quality from Vision Engineering Surrey, York Bolton Mill engine circa 1890, upright clad boiler for propane gas firing with water suppl...

Freelance Design 5 inch gauge Pacific Locomotive and Tender, live steam coal fired example, comprising black body with BR 6 wheel tender, 4-6-2 wh...

5 inch gauge Simplex style gas fired locomotive, 0-4-0 example, hand painted in green and named "Irene", easy access to back head controls compris...

5" gauge "Chaloner" style locomotive, coal fired example, 0-4-0, comprising of wooden clad steel vertical boiler, with twin cylinder vertical engi...

A well-engineered 5" gauge coal-fired "Polly 2" locomotive and tender, 0-4-0 alignment and hand painted in maroon with 4 wheel "PHBR", of usual sp...

A 3.5" gauge to LBSC designs Virginia live steam locomotive and tender 4-4-0 configuration, with a quantity of spare parts and components ...[mor...

A part built 3.5" gauge live steam 4-6-0 locomotive and tender, requires major work for completion ...[more]

Part built 5 inch gauge live steam Royal Scot 4-6-2 locomotive and tender, suitable for spares or restoration ...[more]

A Twin Sisters Collection of 5" gauge locomotive components to include boiler, frames, connecting rods cylinder casing, various leaflets and other...

A collection of 3.5" gauge Princess Marina Stania Moghul live steam locomotive components, and accessories, to include a part complete chassis, tw...

Exhibition quality model of a Victorian steam launch, 4ft long and built by Mr.R Roebuck of Guildford. Fitted with a horizontal boiler, which is g...

Scratchbuilt Stirling cycle hot air gas powered engine, titled Noddy, free running example housed in a glazed display case, case to measure 36cm x...

A very fine Marklin circa 1910 convertible live steam engine, boxed example, with original label reading No. 4099, the engine itself can be used f...

A Wilesco D430 Hobby-Technik locomobile comprising gold and black body, housed in the original polystyrene packed box with accompanying A386 water...

A Mamod TE1A traction engine comprising green body with red wheels, complete with canopy, housed in the original card box, model is heavily used ...

A Mamod SR1A steam roller of usual specification, housed in the original card box complete with scuttle, burner, steering rod, and other accessori...

An original Mamod log trailer with original load and blue chassis and red spoke wheels ...[more]

A very well-engineered live steam stationary mill engine titled Hardwicke as featured in the Midlands Model Engineering Exhibition in 1993, constr...

A very well engineered wooden and base metal model of a stationary beam engine, comprising of vertical 2.5" cylinder fitted with slip eccentric, w...

A very well engineered horizontal hot air engine with brass spirit tank, free running example, powering a 3" flywheel, of gunmetal, brass and copp...

A scratch-built Sterling Cycle Hot Air engine comprising of glass heat exchange with open crankshaft casing, powering a polished metal 4" flywheel...

A scratch built from brass, copper and gunmetal components, stationary horizontal hot air engine, comprising of horizontal heat exchange with bras...

H Haberland of Mexico vertical hot air Sterling Motor engine, comprising of glass heat exchange with single wick spirit burner, powering a heavy 4...

A very well engineered scratch built model of a horizontal flamelicker engine of usual specification with large heat exchange, slip eccentric styl...

A very well engineered live steam stationary steam plant comprising of Stuart Turner Babcock boiler with sight glass, steam gauge, and take-off, p...

A very well engineered stationary steam plant, built by LJ Evans in 1981, comprising of large Stuart Turner Babcock boiler with sight glass, steam...

A Mamod TE1A steam tractor, of usual specification housed in the original card box, little used, with matching log trailer ...[more]

A very well engineered gas powered live steam plant comprising of large vertical wooden clad gas powered boiler with sight glass, gauge, twin safe...

A very well-engineered table engine, comprising a single vertical cylinder, centrally positioned below a green rectangular frame, the frame is fit...

A very well-engineered Circa 1909 Stuart Turner Gas Engine fully restored in working condition with calor gas conversion and gas canister, gas bag...

A very well made model of a approximately quarter scale travelling caravan, finished in cream, green and maroon, with nicely detailed walnut style...

4-inch scale Clayton and Shuttleworth Steam Wagon, Registration VU59 EEN (With Log Book), coal-fired example with large vertical wooden clad boile...

2.5 inch scale "Pride of Penrhyn" Steam Lorry, coal-fired example with silver soldered copper boiler built from Winson Engineering components, ver...

A very well engineered 2 inch-scale live steam Burrell "Thetford Town" Scenic Showmans Engine, built from Ronald H Clark "Thetford Town" Drawings,...

A 5 horse power Red Wing Motor Co 'Hit and Miss' 1/4 scale petrol engine, this quarter scale model runs on petrol and uses a buzz coil as an ignit...

A very well made 1/8th scale model of a Fowler BB1 Class Ploughing Engine, built from measurements and photographs of the two ploughing engines at...

A very well-engineered stationary mill engine, horizontal formation comprising single cylinder with slip eccentric, cast in exhaust and steam port...

A well made wooden model of a travelling living quarters, finished in blue and cream with hinged roof to reveal various internal components, figur...

Decommissioned live steam model of a 2½" gauge 4-6-2 Flying Scotsman style locomotive and tender, finished in green, and numbered 007 and named Fr...

6" scale freelance design coal-fired steam traction engine, originally built in 1903 and based on a locomobile engine, as fitted to Stanley steam ...

Hornby Stephenson's Rocket 3.5" gauge model of a G104 coach, appears as issued in the original box ...[more]

A Record ML-210 Table Top Lathe, with booklet and tin of spares/tools Unable to test this item.Length 49cm. Full length 60cm. Width 24cm. ...[mo...

Collection of Railwayana to include BR (M) Hand Lamp, LNER Loco Lamp, 32T Wagon Plate and a signal box plate ...[more]

BR (E) stamped clock dial, comprising white dial with Roman numerals, un-powered example, appears to have been run off batteries but the power uni...

BR/SR distant signal arm in ex railway condition, complete with both lenses ...[more]

BR home signal arm, complete with both lenses, ex railway condition ...[more]

A Large collection of Corporation transport buttons arranged alphabetically A-M & N-Z displayed on two display cards and the majority in annotated...

A large collection of Omnibus buttons, a display card of 48 individual buttons and the majority in annotated sleeves separating different companie...

A large collection of Railway buttons from Victorian examples to the amalgamation & creation of British Railways. With 42 displayed on card and th...

A large collection of tramways buttons, 35 on a carded display and the majority in annotated sleeves (Approx 100 examples). Including Brass and Ni...

One bag containing a quantity of mixed railway interest ephemera, tickets and labels, various locations and railway stations included This lot is...

Collection of GWR 1920s Urgent Luggage and Wagon Labels ...[more]

A very well-made wooden hand built radio controlled model of an LT246 Lowestoft Drifter, named "Margaret Hide", hand painted in brown and red of t...

Billings Boats Kit Built 1/40th scale radio controlled model of a US Coast Guard Boat, of usual specification with various literature and notes re...

Pre-built radio-controlled model of a US Coast Guard cutter, fitted with a twin can motors and the rudder servo, space to fit ESC, receiver and ba...

A very well made 1960s wooden hull pond yacht, hand painted in white with stained wooden deck, weighted keel with mast, no sails, fully raised on ...

A very well made 1960s wooden hull pond yacht, hand painted in white with stained wooden deck, weighted keel with mast, no sails, fully raised on ...

A very well made 1960s wooden hull pond yacht, hand painted in white with stained wooden deck, weighted keel with mast, with sails, fully raised o...

A radio controlled 1/20 model of a RNLI Severn Boat in orange, housed in the original card and plastic window box with remote controller ...[more]

Tray containing large quantity of radio control related equipment, accessories ,parts etc to include; Spektrum DX4e remote controllers, various ch...