Fine Militaria & Weapons Auction

Description: solid cast iron cannon mounted to an iron-banded pitch pine frame with spoked wheels, 38 x 36 x 62cm, together with solid cast iron c...

Description: the curved, double-edged steel blade with fuller, featuring parcel tilting along the feathered central rib and ricasso, set into a mo...

Description: two straight and two curved steel blades, all double-edged with etched brass ricassos and pierced midsections with apertures onto red...

Description: also known as a “Tiger Knife”, the double-edged steel blade with fuller, raised spine, and decorative element emanating from the rica...

Description: the single-edged steel blade stamped “Made in Finnish” and indistinct lettering followed by “Vanium”, likely describing the steel all...

Description: the single-edged blade set into a white metal capped hilt, with bone and brass banded ebonised hilt, blade - 16cm, in original black ...

Description: the double-edged steel blade with ricasso stamped “E.R. (Edward VII), 3 and 02” and “J7 E” on the reverse, with scrolled quillon abov...

Description: the double-edged steel blade stamped “E.R. (Edward VII) 1903", with scrolled quillon above brass pinned timber grip and socketed dove...

Description: the single-edged, fullered steel blade with ricasso stamped “Waffenfabrik Mauser - A.G. Oberndorf a.n.” with “16” and emblem on the b...

Description: with curved steel blade with curved quillion sand brass lion mask final with loop, blade - 58cm, altogether - 71 x 12 x 3cm Note: Ple...

Description: in the manner of a Bronze Age implement, 16.5 x 8 x 1cm Note: Please Note: Buyers Fees are as follows Buyers Premium 20% + VAT Online...

Description: also known as a “Tiger Knife”, the double-edged steel blade with fuller and raised spine, forged as a single piece with the wrist gua...

Description: the single-edged blade with false edged tip, with Thai inscription across one face, on a full, wedge-form tang within a splayed bone ...

Description: the solid brass, curved, single-edged blade on an urn-shaped guard, with a swelled knop hardwood grip featuring yellow enamel and cop...

Description: the curved steel blade with half-edged back, marked “Original LEOPARD” with leopard emblem on reverse, the full tang hilt with brass ...

Description: the curved, double-edged blade with prominent midrib running the full length, the ricasso etched with zoomorphic and vegetal decorati...

Description: the curved, single-edged steel blade, with a broad, shallow fuller and an incised ricasso, set into a oviform hilt with brass caps an...

Description: embossed with knight’s visored helmet, 5 x 38 x 38cm Note: Please Note: Buyers Fees are as follows Buyers Premium 20% + VAT Online Fe...

Description: together with an assortment of lead shot and pellets, one stamped “V.S.M.” - 9 x 3 x 3cm Note: Please Note: Buyers Fees are as follow...

Description: with rolled-edge brim, side rivets in higher position as with WWII issued helmets, blackened fabric lining and elasticated webbed can...

Description: constructed of black bakelite, complete with lining and leather chinstrap, 12 x 28 x 26cm Note: Please Note: Buyers Fees are as follo...

Description: in two original Micro-Streak cardboard boxes - 5 x 33 x 9cm Note: Please Note: Buyers Fees are as follows Buyers Premium 20% + VAT On...

Description: one with barbs, one leaf shaped - 49 x 5 x 2cm Note: Please Note: Buyers Fees are as follows Buyers Premium 20% + VAT Online Fee 5% +...

Description: plate mounted horn, with extensive decoration and fitted with “A.O.F.” insignia, surmounted with stag’s head, 13 x 32 x 20cm Note: Pl...

Description: the trefoil blade on a socketed mount, blade - 41cm, 6 x 54 x 3cm Note: Please Note: Buyers Fees are as follows Buyers Premium 20% + ...

Description: with quatrefoil blade  stamped “J” and “C” at the base, with thumb press release locking mechanism, and socketed nickel hilt with dov...

Description: in polytonal leather bound scabbard, blade - 37cm, in scabbard - 52 x 6 x 3cm Note: Please Note: Buyers Fees are as follows Buyers Pr...

Description: partially constructed of pewter with moulded plastic grips, labelled “Made in Spain”, estimated measurements 32 x 12 x 3cm Note: Plea...

Description: the single-edged fulered blade marked at the base of the spine with a "W. (likely an inspector's initial/mark)" below a crown and a "...

Description: with steel head engraved, on a long timber handle, - blade - 22cm, overall - 91 x 18 x 5cm Note: Please Note: Buyers Fees are as foll...

Description: engraved on base “BE 938” and “65”, 17.5 x 7.5 x 7.5cm Note: Please Note: Buyers Fees are as follows Buyers Premium 20% + VAT Online ...

Description: with smooth-bore steel barrel in mahogany stock fitted with steel ram rod in brass housings, as well as two steel suspension loops, b...

Description: the smooth-bore damascus barrel with flared muzzle, fitted with a ring-turned and spiral steel ramrod in a carved bone housing, the f...

Description: the octagonal barrel stamped with both "B.C.P. (Bermingham Proof Company)" and "V." beneath crossed sceptres and crown, with hammer a...

Description: the rifled octagonal barrel with iron sight with six-chamber percussion cap cylinder secured by draw pin, and a high-spur hammer, fea...

Description: the barrel with sight and prominent rib stamped indistinctly regarding place of manufacture,six-chamber cylinder, and moulded bakelit...

Description: sometimes classified as "3rd Model bacon" pocket revolvers, the signed marked "DICTATOR" to top, and featuring a five-chamber cylinde...

Description: surmounted by a crimson plume with white metal ring and ball-mounted foliate socket on a timber rod, the piece is clad in black sable...

Description: with green-tinted feather flume on detachable brass rod, the cap badge reading "London Rifle Brigade, Ich Dien", with the mask of Med...

Description: decorated with four metal studs and crescent emblem, 49 x 49 x 9.5cm Note: Please Note: Buyers Fees are as follows Buyers Premium 20%...

Description: the single-edge fullered blade with rocaille etching, the ricasso with retailer’s mark for a “J.M. Boom, 47, Kildare St. Dublin” and ...

Description: the  brass barrel with flared aperture and iron sight in mahogany full length stock, mounted with spring-loaded trefoil bayonet blade...

Description: the side-by-side octagonal brass barrels stamped "E.L.G. (Liege)" over a star within a plain oval, along with an "R. (likely an inspe...

Description: the side-by-side barrels with central iron sight and original steel ramrod with helical top, stamped with "B.(German proof using Maus...

Description: otherwise known as the VZ-27 or CZ-27, a German occupation .32 pocket pistol made in Czechslovakia, 12 x 16 x 2.5cm Note: Please Note...

Description: maker’s mark ”Smith, London” etched into lock plate, likely referring to William Smith, who worked between 1810-1845, with steel hamm...

Description: stamped “ E.L.G. (Liege)” on cylinder and “M (likely an inspector's initial/mark)” beneath a star on cylinder, barrel and trigger mou...

Description: notable as an example of the transition between the pepperbox percussion revolver and the single barrel revolver, with a rifled octag...

Description: mounted with a spring loaded spike bayonet, activated via sliding the trigger guard back towards the user, and marked “E.L.G. (Liege)...

Description: the nickel-plated barrel stamped with a "U." beneath a crown to the underside, with a breech loading mechanism and timber flanked gri...

Description: the single-edged blade with “Schrade-Walden, N.Y. U.S.A. 148” marked to ricasso, with brass finger guard plate and bakelite-bound gri...

Description: embossed “Gott Mitt Uns“ in circular wreath around central eagle, 5 x 6.5 x 1.5cm Note: Please Note: Buyers Fees are as follows Buyer...

Description: the oviform medal decorated with helmet over crossed swords, enclosed in oval laurel wreath, stamped “30” on verso, 4.5 x 3.5 x 1cm N...