- List
- Grid
This auctioneer has chosen to not publish their results. Please contact them directly for any enquiries.
A most unusual 12" brass level with rosewood infill, label below clear vial reads Wm Kennedy 1890
A most unusual 12" brass level with rosewood infill, label below clear vial reads Wm Kennedy 1890 in tin case G++ ...[more]
A little used STANLEY No 31 wood bottom jointer G++
A plough and 7 moulding planes by PRESTON G
A set of four unused mortice chisels by MARPLES 1/4" to 1/2" with composite handles F
Six bevel edge chisels by STANLEY USA 1/4" to 2" one lacks handle G
Four long bevel edge chisels by SORBY 1/4" to 1 1/2" with boxwood handles G++
An unused English STANLEY No 7 in orig box G++
An unused RECORD No 722 router in orig box G++
A d/t steel coffin smoother by SPIERS good repair to front infill G
A wheelwrights steel faced beech jarvis G+
A 1 1/8" steel bullnose plane by MUSGRAVE with orig iron with engraving to one side F G Twist G+
A 1 1/8" steel bullnose plane by MUSGRAVE with orig iron with engraving to one side F G Twist G+
A USA STANLEY No 17 adjustable block plane with orig iron G+
A little used RECORD 07 jointer with orig trade label, a few light pitting spots to side in orig
A little used RECORD 07 jointer with orig trade label, a few light pitting spots to side in orig part box G+
A RECORD No 04 in tatty box and another G++
Two badger planes and a jack plane by TURNER, AMES and MARPLES G+
A RECORD T5 fore plane with replaced side handle G+
A very little used RECORD 05 1/2 fore plane with orig trade label in orig tatty box G++
35 chisels, gouges and carving tools G
14 beech and boxwood s/shaves G+
A USA STANLEY No 6 with English iron G
Two dado planes with brass depth stops by MATHIESON, VARVILL and another G+
Two toothing planes and 3 smoothers all by MATHIESON G+ ...[more]
A 1 1/8" steel bullnose plane by PRESTON and another 1" G
A pretty steel bullnose plane 3 1/2" x 7/8" unfortunately with chip to mouth and some pitting
A pretty steel bullnose plane 3 1/2" x 7/8" unfortunately with chip to mouth and some pitting spots to sole G
Two brass framed squares by SORBY and two others, some pitting G
35 screwdrivers with composite handles G
A SARGENT No 196 rabbet plane with orig iron G
A badger, jointer and jack plane by MATHIESON, PRESTON and MARPLES G+
Eight chisels with hooped handles G
A STANLEY No 9 1/4 block plane with orig iron G+
Three early moulders by DARBY, DARBY & BRISCOE and FROGATT G ...[more]
A 1 3/4" bevel edge chisel with boxwood handle by MARPLES (name erased) G
Nine mortice, marking and slitting gauges G
A MORRILL Patent saw set and 10 others G
A brass faced screwstem rounder G+
A quantity of new plane irons N
A shoe last and four individual stakes G
A mortice lock chisel and 12 other chisels and gouges G+
Two boxed oilstones and quantity of abrasive wheels etc G
A RECORD No 04 (some rust) and a No 050 both in orig boxes G+
Six expansive bits in orig boxes and 5 others G
18 turning tools (some rust) G
Eight MARPLES carving tools in a box for six G+
A RECORD No 073 shoulder plane for restoration G-
A 1 1/8" brass shoulder plane and a 1 1/2" steel shoulder plane G
A handled plough, screwstem plough and two others G+
Six block planes by STANLEY, RECORD and MILLERS FALLS G+
Loading...