The Keith Hockin Collection

Of a Talbot Hound, a long-eared hunting dog, standing alert, within a slender roundel, framed by foliate linear spandrels and a stylized egg-and-d...

Designed with a female portrait facing dexter, wearing a French-type hood and puffed-sleeved gown, within a punch-decorated roundel, the field wit...

Designed with a male portrait, facing sinister, with long pointed beard and wearing a cap with narrow brim, trapezium shape, 35cm high, 27.5cm wid...

Each carved with a female torso, one with a woven basket atop her head, on a foliate-carved pedestal, 10.5cm wide, 40cm high, (2).

Designed as a wyvern, with scaly coiled tail, 50cm wide, 19.5cm high.

With iron bale handle let into top, two pairs of short, over two long graduated drawers, each with run moulded centre, sides of dovetail construct...

The back part open and with a fielded arched panel, topped by an arched cresting rail with bold scroll-carved ends, on slender rectangular-section...

Each with a slender arched and fielded back panel, below an arched double-C and scroll carved and pierced cresting, flanked by urn finial and balu...

Having a one-piece oval top, on three long and slender facetted legs, 63cm high, 43cm wide.

Having a fully enclosed back, the plain back panel with deep frame moulding, below a carnation and tulip-flower carved and scroll profiled crestin...

Having a double-reeded top, and leafy-lunette carved rails, on parallel-baluster over real turned legs, joined by plain stretchers all round, 57cm...

The elm circular top fixed to a baluster ring-turned pillar, on three hipped and downswept legs terminating in pad feet, 68cm high, 54cm diameter.

The back plate extending in a shallow arch with shaped end and pierced for hanging, the sloping hinged lid candle box atop an open spill (or cutle...

Designed with St. Roche, typically holding a staff, revealing the sore on his thigh, a dog and child at his feet, all within an arcade, and topped...

Designed with a bold simple linenfold, 42.5cm high, 31.5cm wide Provenance: Former C. Pickvance Collection.

Consisting of six mainly broad boards, and two posts, largest board 135cm high, 25cm wide, (8).

Of typical form, with loping shoulders pierced for a thong and stitched seams, 25cm high, 21cm wide Provenance: Former John & Judith Adler Collect...

Of barrel-form, with sloping shoulders pierced for a leather thong and stitched seams, punched-decoration to front and ownership initials 'WB' str...

The full-length figure having a 'naive' carved face, with wide moustache and square chin, wearing a doublet and trunk hose, topped by a spray of t...

The handle carved as the face of an old gentleman, wearing a kerchief, 90cm long.

Having a triple-reeded top, meandering scroll-carved rails and columnar-turned legs, joined all round by plain stretchers, 52cm high, 48cm wide, 2...

Having two arched, cusp-profiled, scroll and hatch carved splats, each centred by a mask with typical pointed chin, and with pendants, the panelle...

Painted in a dark brownish-green, with two open shelves, each with several spoon apertures to front, ogee-shaped sides, 72cm wide, 70cm high.

With fixed top, the sloping fall carved with the framed initials 'W H' below the date '1681', the frieze carved with alternate flowerheads and loz...

The circular revolving and tilt-top formed from three boards with reeded edge, the columnar-box support on a baluster-turned pillar, with pendant,...

With one-piece rectangular top, shallow plain rails and rectangular-section gently splayed legs, joined by a H-form plain stretcher, 40cm high, 34...

Having a one-piece dished circular top, on a baluster vase-turned pillar and three downswept legs, terminating in pad feet, 62cm high, 32cm diamet...

Having a fielded back panel, serpentine profiled top rail and rounded downswept angled winged boards set into the side of the flat outplayed and r...

The open back with deep arched cresting rail, inward scroll-profiled ended back uprights, boarded seat, on block and baluster-turned front legs, j...

The top with simple moulded edge, the run-moulded rails with dog-tooth and flowerhead punched-decoration, and chip-carved lower edge, on parallel-...

Having a fully enclosed back, with fielded panel, boarded seat with moulded edge, and spiral-turned front legs, joined by a matching fore-rail and...

Having a demi-lune top, and triangular base with lower edge moulded rails, on baluster-turned legs joined by rectangular-section stretchers, the s...

The lid principally of one wide board, the frieze carved with symmetrical bold tulips and cross-hatched buds, interior lidded till, 63cm wide, 43c...

Having an impressive one-piece top with rounded edges, on square-section facetted legs, joined all round by plain stretchers, 66cm wide, 64cm high...

The double-reeded top of uncommon design, namely a relatively flat-angular edge, shallow lunette-carved rails, on turned legs joined by plain stre...

In the form of a large jug, with long spout, stitched angular handle and footrim, 43cm high, 33cm wide.

Of typical form with sloping shoulders pierced for leather thong, stitched seams, ownership initials 'SB' to one end, house or ownership mark ('cr...

Of typical form, with sloping shoulders and stitched seams, 17cm high, 14.5cm wide.

Having a fully enclosed fielded panelled back, below a scroll-profiled and pierced cresting, pyramid-finial back uprights, boarded seat, on block,...

Having a triple boarded top with ovolo-moulded edge, a frieze drawer, and acorn, baluster and ring-turned legs, joined by a X-form shaped platform...

Having a round, sixteen-sided and ovolo-moulded boarded tilt-top, on a baluster-turned pillar and three downswept legs terminating in pad feet, 7...

A male portrait, facing sinister, and a female, facing dexter, each finely dressed, within a beaded oval medallion, and framed by a fruiting and s...

Topped by a medallion of a male bust, looking to sinister, wearing a fluted skull cap and a shirt with high collar, in a foliate wreath border, th...

Topped by a medallion of a female bust, looking to sinister, wearing a French-type hood, and a gown, atop stylized gourds and Renaissance motifs, ...

Carved with an elongated and segmented lozenge, against a similar carved linear ground, 65cm high, 17cm wide Provenance: Former C. Pickvance Colle...

Pin-engraved with leafy-flowering stems, and a farmer-type figure atop a butterfly, along with the initial 'P' and numbers '7' and '8', each handl...

With decorative line turnings to exterior, including around the stepped foot, 35cm diameter, 11.5cm high.

Of typical turned form, with ribbed handle, length 38cm; together with a stained beech cribbage board and a brass poker with full-rigged ship fini...

With slightly rounded rim, and flat edge, the underside of the flat base stamped with the ownership initials 'EE', 22.5cm diameter.

Of elongated form, the backplate raised to the centre with arched top and scroll-profiled sides, pierced for hanging, the box with sloping hinged ...

Formed from natural spiral, with hatched collared ball terminal, 91cm high.

One with a relatively flat rim and straight edges and flat base, the other with rounded rim and edge, flat base, both 23.5cm diameter, (2).

Having a tapering stem with pointed terminal, the oval bowl engraved with a pair of flaming hearts atop an inscription, the back of the bowl desig...

Having a plain back panel, a scroll-profiled and uncommon floral carved cresting rail, pyramid finial back uprights, panelled seat, on block and b...

Lacking boarded seat, having a raised and moulded back panel, scroll-profiled cresting and pyramid-finial uprights, on turned front legs joined al...

The top of two wide boards, the deep rails with narrow lower edge moulding, on collared square-section tapering legs, 140cm wide, 83cm wide, 53cm ...

Of dovetailed boarded construction, with vertical paired flat-ogee arched and panelled cupboard doors, flanked by broad run-moulded uprights, moul...

Of typical barrel-form, with sloping shoulders pierced for a leather thong, stitched seams, punched-decoration to front, 11cm high, 9.5cm wide.

Of typical barrel-form, with sloping shoulders and stitched seams, punched-decoration formed using a single flowerhead die to front and rear, each...