The Oak Interior

The flat rim with hammer mark within a circle, and strengthening semi-circular bead to the rear hammered edge, booge again hammered, single incise...

The multiple reeded rim with a border of punched flowerheads, the booge with hammered gadroons, the large central boss with further petal lobes, h...

The slender tapering body with four incised bands, lip to rim, ownership initials 'GL' over 'IL' to strap handle, with flush lower attachment and ...

The drum with low slender fillet, solid chair-back thumbpiece, hollow handle with hooded ball terminal, hallmarks to rim and touchmark inside base...

Each of cylindrical form, with ovolo-moulded lip, and short flared footrim, one with touchmark to underside of 'IH', (PS5040), possibly one of the...

Touchmark of Parnall & Sons, (fl.1860-1914), (PS7118), to underside; together with a similar half-pint example, (2). ...[more]

Touchmark inside base of George Hayter, (fl.1870-1887), (PS4495), 11cm high.

The gently domed 'flat' lid with pierced front denticulations, bombé thumbpiece, S-curve handle with upper vine-cast decoration and bold rams' hor...

Having a straight-sided bowl, flat base with footrim, curved tab bracket under Old English ear, with ownership initials 'TR' to top of ear and tou...

Each having a straight-sided bowl, flared lip and flat base with foot rim, the peacock ear centred by a shield, no ear bracket, touchmark to under...

The plain drum with entasis and engraved 'Soulkholm' to the upper front, the lid with front denticulations, scroll thumbpiece, handle with upper t...

The straight-sided drum designed with a bust portrait of King William III and Mary II, below a crown and entwined cypher 'W/M R', all within an ov...

The top of the lid engraved 'STUDY UNITY', the drum finely engraved with the arms of the Wool Guild of Norwich, above a narrow fillet, atop the in...

The truncated cone body with two equally spaced slender fillets, the flat-lid with locating flange, wide single-curve handle with lower cylindrica...

Having a wide bellied bowl, a flat base with footrim, triangle and wedge bracket under the peacock-tail-ear, the latter centred by a shield struck...

A pint, with plain body, together with a half-pint, gill and half-gill all stamped 'PIP' to the underside of the lid, (4).

Having a truncated cone body with low fillet, a single-curve handle with flush terminal, and crowned 'X' mark inside base, height 18.5cm; together...

The relatively slender straight-sided body with two narrow bands, and crowned 'WR' mark (mirrored RWR) to lip, the lid with front pierced denticul...

The highly unusual stepped dome lid with 'ribbed' edge, rams' horn type thumbpiece, single-curve handle with engraved initials 'AB', and shield te...

The tapering drum with single narrow fillet below collar and matching twin-fillet to base, ovolo-moulded foot, the bun lid with flattened-ball kno...

Having hallmarks of maker 'IP' (PS7664) to lid, pierced-heart and bar thumbpiece, swan-neck handle with boot-heel terminal, the drum with upper an...

Having a plain body, touchmark to rim possibly of William Waters, London, (fl.1670-98), (PS9823), ownership initials 'I S' struck to lid and handl...

Having a bulbous body with single fillet, large spout and perforated grating, double-C overlap handle, and numerous Victorian verification marks t...

Having a domed lid with two-tier knop, a solid chair-back thumbpiece, a broken C-shaped handle (in the style of a spire flagon) with hooded ball t...

The rim with raised 'rolled' edge and struck with Lombardic initials 'H' and 'A', with deep booge and small prominent boss, unidentified touchmark...

Having a tapering straight-sided body with high and low fillets, centred by the engraved initials 'B' over 'W C' and 'I N', along with the date '1...

Having a tapering straight-sided drum with paired incised lines below collar, an ovolo footrim, bun lid with boss, pierced-heart and bar thumbpiec...

The flat plate with multiple reeded and rolled edge, on three ball feet, hallmarks to front and touchmark to rear, possibly relating to Thomas Mel...

The rim engraved 'THE GIFT IS SMALL THE LOVE IS ALL', along with struck ownership initials 'EP', opposed by the hallmarks of John Shorey I, London...

Each rim with geometric decoration, wriggled initials 'S' and 'B' and hallmarks of Abraham Wiggin (1707-?), (PS10120) one designed with a peacock,...

Hallmarks to rim and touchmark to rear of William Hall I, Birmingham, (fl. 1662-1702), (PS4274), diameter 22.2cm, rim 4.8cm (43%) For a broad, mu...

The cylindrical plain body with bullet-shaped base and ovolo-moulded foot, knopped bun lid, pierced heart and bar thumbpiece, hollow swan-neck han...

With wide plain drum, ovolo-moulded footrim and flat base, upright 'flat' twin-lobed thumbpiece, swan-neck handle with shield terminal, apparently...

The lid with front denticulations, and designed with a large eight-petal flowerhead, the drum with paired conforming flowerheads flanking a triple...

With broad incised multiple reeded rim, and flat well, touchmark of Richard Donne (fl.1677-1710), (PS2922), to rear of rim, diameter 18.6cm.

The all-over wavy-linear decoration applied on a wheel, diameter 24.4cm Literature: See P. Hornsby, 'Pewter of the Western World' (1983), p. 92, ...

The well designed with the Royal Coat of Arms, complete with lion and unicorn supporters, garter and motto, the rim designed with meandering acorn...

The rim engraved 'T. S (J?). Collet', opposed by the engraved initials 'S C' over the date '1707', touchmarks and hallmark of Richard Smith, proba...

Having a bellied bowl, bossed base and relief cast triangular bracket under the geometric crescent ear, ownership initials 'R' and 'S' to top of e...

Having a bellied bowl, and bossed base relief cast with medallion bust of William III, flanked by a crown and orb, two old-English-ears, each with...

Each with a beaded collar and ribbed footring, crowned 'X' mark inside base, height 6cm, diameter 8cm, (6).

The lid with front denticulations, rams' horn thumbpiece, broken swan-neck handle with shield terminal below the three-part hinge and similar shap...

Having a plain, straight-sided, tapering drum, a wide ovolo-moulded foot rim, domed-lid, scroll-moulded thumbrest, and bold swan-neck handle with ...

The plain drum with bullet-shaped base, ovolo-moulded footrim, bun lid with ball and fillet knop, erect thumbpiece, strap handle with splayed term...

The tapering drum with one top and three base fillets, and with front denticulations to lid, ram's horn thumbpiece, and handle with squat 'spade' ...

Having a plain straight-sided and tapering drum, reeded foot rim, the lid with pierced front denticulations, spray and heart upright flat thumbpie...

With two pairs of narrow incised lines to lower cylindrical body, ovolo-moulded foot and flat base, bun lid, and pierced heart and bar thumbpiece,...

Having a knopped dome-lid, open chairback thumbpiece, and broken S-scroll handle with fish-tail terminal, the tapering drum engraved 'Richd Selby ...

The tapering drum with high fillet and flared skirt base, knopped domed-lid, double-scroll 'drape-and-drop' handle. with shield terminal, chairbac...

The baluster body engraved 'Wine Company in Scotland', with spout, single-curve handle with spade thumbpiece and lower strut attachment, apparentl...

The straight-sided drum with two fairly broad fillets, and splayed footrim, the lid with front pierced denticulations, ram's horn thumbpiece and h...

The lid topped by an engraved Tudor Rose, the single narrow drum engraved with a bull, solid chairback thumbpiece, and S-scroll handle with hooded...

Of flared form, with slender footrim, decorated with the bust of William III & Mary II, each within an oval, the rim with meandering leaf decorati...

With typical crowned medallion to the centre of the lid, shell thumbpiece and slender S-scroll handle with long cylindrical lower strut attachment...

The tapering straight-sided body with a high band of lenticular beading, above diagonal gadrooning, crowned 'WR' mark (King William III) to rim, h...

The fluted dish of twelve lobes, on a rounded footed stem, height 5.4cm, diameter 9.9cm Provenance; Former C. A. Peal & Franklin Collections.

The front rim bearing maker's touchmark of 'IF' and horse, opposed by ownership triad and 'housemark', bossed well, diameter 11.5cm, rim 2.1cm (37...

Having a geometric-pierced cartouche ear, stamped with initials 'A W', bellied bowl and bossed base, linguiform bracket under ear, overall length ...

Having a geometric-pierced cartouche ear bellied bowl and bossed base, linguiform bracket under ear, hallmark to boss of John Pettiver, `London, (...

The narrow flat rim with crowned hammer mark, and triangular bead under edge, extensive nature's gilding, diameter 19.5cm.